Metode Pelacakan HAZ Berdasarkan Urutan Gambar menggunakan Termografi InframerahPada Pengelasan MIG Aluminium AA6063
##plugins.themes.bootstrap3.article.main##
Abstract
Welding jointed commonly applied in industry, capturing method heat affective zone on welding jointed metal inert gas is needed to know the effect of heating on welding zone using capturing method of picture order by thermal imaging camera on the process of welding. This method can be used to capture instability on welding process and deforming on welding jointed. The examination of first data, second data and third data are gotten the limit heat affected zone 17 mm average based on dirrect measurement data on welding result. The highest temperature on welding process on 80th second on first examination it is
280 °C
##plugins.themes.bootstrap3.article.details##
How to Cite
Asrul, A. (2019). Metode Pelacakan HAZ Berdasarkan Urutan Gambar menggunakan Termografi InframerahPada Pengelasan MIG Aluminium AA6063. Jurnal Teknovasi, 6(03), 1–7. https://doi.org/10.55445/jt.v6i03.102
References
American welding society. 1976. welding hand book (Vol. 1).
B. Mishra, R. R. Panda, and D. K. Mohanta, Metal Inert Gas ( Mig ) Welding Parameters
Optimization,”, pp. 637–639, 2014
Fidali Marek, 2017, Method of tracking of HAZ properties based on sequenceof infrared
images, Gliwice, Poland, no. 04, vol. 63, ISSN 2450-2855
ISO 9692-1, International Standard of joint preparation, Switzerland, ISO 9692-1:2013 (E),
2013.
L. H and V. Vlack, Elements of Materials Science and Engineering. 1991.
M. Ishak, N. F. M. Noordin, A. S. K. Razali, L. H. A. Shah, and F. R. M. Romlay, EffectOf
Filler On Weld Metal Structure Of Aa6061 Aluminum Alloy By Tungsten Inert Gas
Welding M., vol. 11, no. June, pp. 2438–2446, 2015.
Muku, & Dewa, K. M. (2009). Kekuatan Sambungan Las Aluminium Seri 1100 dengan
Variasi Kuat Arus Listrik Pada Proses Las Metal Inert Gas ( MIG ). Cakram, vol. 3,
no. 1, 11–17.
Satrio Hadi, Rusiyanto. dan Pramono. 2017. Pengaruh variasi kampuh las dan arus listrik terhadap kekuatan tarik dan struktur mikro sambungan las TIG pada aluminium 5083,
8(2), 27–35.
Wiryosumarto, Harsono, and T. Okimura, Teknologi Pengelasan Logam. Jakarta: PT.
Pradnya Paramita, 2000.
B. Mishra, R. R. Panda, and D. K. Mohanta, Metal Inert Gas ( Mig ) Welding Parameters
Optimization,”, pp. 637–639, 2014
Fidali Marek, 2017, Method of tracking of HAZ properties based on sequenceof infrared
images, Gliwice, Poland, no. 04, vol. 63, ISSN 2450-2855
ISO 9692-1, International Standard of joint preparation, Switzerland, ISO 9692-1:2013 (E),
2013.
L. H and V. Vlack, Elements of Materials Science and Engineering. 1991.
M. Ishak, N. F. M. Noordin, A. S. K. Razali, L. H. A. Shah, and F. R. M. Romlay, EffectOf
Filler On Weld Metal Structure Of Aa6061 Aluminum Alloy By Tungsten Inert Gas
Welding M., vol. 11, no. June, pp. 2438–2446, 2015.
Muku, & Dewa, K. M. (2009). Kekuatan Sambungan Las Aluminium Seri 1100 dengan
Variasi Kuat Arus Listrik Pada Proses Las Metal Inert Gas ( MIG ). Cakram, vol. 3,
no. 1, 11–17.
Satrio Hadi, Rusiyanto. dan Pramono. 2017. Pengaruh variasi kampuh las dan arus listrik terhadap kekuatan tarik dan struktur mikro sambungan las TIG pada aluminium 5083,
8(2), 27–35.
Wiryosumarto, Harsono, and T. Okimura, Teknologi Pengelasan Logam. Jakarta: PT.
Pradnya Paramita, 2000.